IMPORTANT - This product should be used in conjunction with the Cue Restoration Wax. This grain filler is not intended as the final finish on the cue. This grain filler should be applied as instructed first. The cue restoration wax should then be applied as instructed to achieve the final top coat surface finish.
 
A blend of oil, wax, dye and ebony dust formed to rejuvinate the grain on your Ash shafted cue.  Not to be used on maple cues.
 
Contents:
1x Tin of Ash Grain Filler (Black)
1x Applicatior cloth
1x 00 Grade wire wool
2x Nitrile gloves
 
Instructions for use:
With a light to moderate grip clean the cue using the wire wool provided. This will help to prep surface by gently removing any dirt from the cue that can build up over time but without damaging the wood.
Using a corner of the cloth supplied apply a thin and even coat of grain filler to the shaft area of the cue as required. Rub the Grain Filler into the cue until all of the grain has been covered
Clean the top surface of the cue again with 00 grade wire wool to remove the excess grain filler from the cue using the towel provided.
Apply a coat of Karl Craik Customs cue restoration wax (sold separately) as instructed.